Publication Library

This should be a short description, how to convert an application to a higher version.

Product environmental information, Fuse switch disconnector, Kabeldon SLD, 18-06

This document explains the settings for the tunneling server and explains step by step how to use them.
The KNX system generally has two types of communication on Ethernet basis: KNXnet/IP routing and KNXnet/IP tunneling, both use the UDP protocol.
Tunneling has the goal of accessing the KNX bus via Ethernet, e.g. for commissioning, error diagnostics or visualization. A point-to-point connection is established between a PC and the IP router. This can be done locally over LAN or over the Internet.

How to specify the indoor instrument transformers correctly

TEST REPORT LBRP 14175/00 Rev. 0

RECORD OF PROVING TESTS LBRS 13893/00 Rev. 0 Page 1 of 6
- internal use only and not compliant with the requirements of the Standard UNI CEI EN ISO/IEC 17025 for tests reports -
modR-E 000A/lab-edA
TEST REQUEST NR.: 10013893
COPY TO : BENEDETTI Pierceleste
TESTED OBJECT : Steel profiles ZN200 and ZN275
TEST : Salt mist
PURPOSE OF THE TEST: Verify the corrosion resistance of the steel profiles in object
TEST STANDARD :
TEST RESULTS AND REMARKS:
Steel profiles ZN200 : salt mist test's failed, after 193 hours, there are red corrosion products
Steel profiles Zn275: the material is compliant to the specification.

Report INRIM 16-0367-01

RECORD OF PROVING TESTS LBRS15726/00 Rev. 0 Page 1 of 6
- internal use only and not compliant with the requirements of the Standard UNI CEI EN ISO/IEC 17025 for tests reports -
modR-E 000A/lab-edA
TEST REQUEST NR.: 10015726
COPY TO : BENEDETTI Pierceleste, QUARTERONI Andrea
TESTED OBJECT : Stainless steel AISI 304 sheet (all information attached at the end of the report).
TEST : Two 12 day periods (total 24 days):
- 5 cycles of 24h each to damp heat cycling test according to IEC 60068-2-30 (Test
Db) at (40 ± 3) ºC and relative humidity of 95 %
- 7 cycles of 24 h each to salt mist test according to IEC 60068-2-11; (Test Ka: Salt
mist), at a Temperature of (35 ± 2) ºC.
PURPOSE OF THE TEST: Resistance to corrosion (9.13.2 - Severity test B):
TEST STANDARD : IEC 62208
IEC 60068-2-30
IEC 60068-2-11
TEST RESULTS AND REMARKS:
The AISI 304 sample passed the test according to IEC 60068-2-30: any corrosion product has been found on the
surfaces.
TEST REPORT Nr :
Date of issue: 26.01.2017
Approved
Prepared Verified

Selective Coordination using GE Circuit Breakers Feeding Elevator Switches