Publication Library

25 page guide; Overload heaters for Full Voltage Magnetic and Manual Starters, Reduced Voltage Starters

Horizontal Metering products offer 600V metering solutions for strip malls and small commercial buildings requiring two to six metering locations. These products accept meters with 100A to 200A ratings and they have a compact vertical footprint.

A login is required to access software for configuring ABB Cylon® systems, and for accessing some other resources. I addition, technical updates are broadcast to customers using a “News Ticker” system, so that in order to receive Technical Bulletins etc., customers must subscribe to that system. This document describes how to access these resources.

A UC32 Field Controller can be configured to monitor environmental parameters over a period of time and learn from them the optimum times for switching plant in order to minimise energy usage. The elements of the Strategy that work together to achieve this are collectively referred to as an “Optimiser”. An Optimiser can be set up to govern Heating, Cooling, or a combination of both. This document describes the component modules and connections required within a Strategy that is to act as an Optimiser. In order to set up the Optimiser as described in this document, you will need the following product versions: UC32 Firmware version 6.1.7 or later UEC Software version ETv6.60 build 6 or later

Using the UCC-BACnet driver, ABB Cylon BACnet controller trunks can be connected to Unitron sites without the need for an ASPECT® supervisory control layer. Unitron Command Centre (UCC) is capable of retrieving data from mixed BACnet® / Unitron sites (CXproᴴᴰ is used to engineer the Cylon BACnet devices). This document describes how to configure BACnet devices for Unitron sites.

Gmail is a free-of-charge email service provided by Google, at gmail.com. Email accounts on this service can be used to notify users of ASPECT® Alarms. This document describes how to configure a Gmail account to accept external connections from an “App”, and how to configure ASPECT so that notifiers use such a connection.

For instances where an ASPECT® Site is required to send SMS messages, a hardware SMS/MMS gateway device must be connected and configured. ABB recommends the SMSEagle devices for this purpose. SMSEagle for ASPECT systems can send 3 types of messages: - ASPECT Engine Restart - Alarm triggered - Alarm cleared This document describes how to configure an SMSEagle device and the ASPECT site to which it is connected so that SMS messages are properly sent.

This document describes how to connect the RESI Modbus to Mbus gateway Module to an Aspect-MatrixMax controller.

Arc Flash Experts discusses different approaches for estimating arc flash PPE requirements

This document describes how to use an FBXi-8R8(-H) controller as a drop-in replacement for a previously-installed CBXi-8R8-H.

The FBU Series is a freely programmable range of Unitron Communications and Field Controllers. The controllers are ideally suited for a wide range of applications for intelligent control of HVAC equipment, and electrical systems including lighting control and metering applications. The FBU Series supports multi-protocol communications simultaneously including Unitron and Modbus RTU. Based on ABB’s FLXeon Line of field controllers, the FBU Series features support for one FLX (Field Level eXpansion) series extension modules providing up to 24 points of control.

Describes How to set up a VPN connection for Embedded WebLink

How to update a ControlTouch with old Firmware (.PDF) [XX] 6136/APP(-500), CT/S2.1(1) Busch-ControlTouch®

“3rd party blocks” can be used instead of Globals in Cylon BACnet controllers, but some customers experienced difficulties with network traffic when replacing Globals directly. This document describes how to use 3rd party blocks in the most efficient way.

4 pages. The new generation GE HPC switch offers two modes of instantaneous protection, similar to that provided by a circuit breaker of equivalent size: 1. Adjustable Selective Instantaneous protection with waveform recognition (WFR) capability. 2. Reduced Energy Let-Through Instantaneous (RELT)

December 2022 ICX Cutout 15-38 kV Outdoor Distribution Cutout

ICX Outdoor Distribution Cutout instructions for installation and use

IEC Style (NEMA Rated) Open Starters PL518 Affected Parts List

Reviews major changes in IEEE 2.0 and considerations for implementing the new guide in the real world

Based on a paper presented at the IEEE 2020 Electrical Safety Workshop in March 2020.