Publication Library

February 2023 Capacitor fuses: technical selection guide

The initial release of CBT firmware v9.0.0 under some circumstances caused a reboot loop problem on the CBT-3T6-5R. Firmware v9.0.1 resolves this issue.

Strategies pre-loaded on CBT-3T6-5R controllers have been updated to resolve a reported issue.

The CBT, CBV and CBX range of controller firmware has been updated to update BACnet operation and product rebranding, and to address a number of issues.

Additional parameters have been added to the FusionAir module.

Enhancement release with updates to the FusionAir Module and some bug fixes.

Enhancement release with updates to the FusionAir Module and some bug fixes.

This is an incremental update that fixes reported issues and adds enhancements.

This is patch fix for an issue present only in CBT-3T6-5R controllers manufactured during a specific time period.

Some CBV-2U4-3T-N-FA-IMP, CBV-2U4-3T-N-FA-SI, CBV-2U4-3T-N-IMP and CBV-2U4-3T-N-SI product were shipped with incorrect actuator jumper settings. This can be remedied by following the instructions in this bulletin.

As part of the CXproᴴᴰ 1.06.02 release, incorrect versions of the CBV sample strategies were included in Sample Apps v3.2. Therefore, the CBV sample strategies are not suitable for production use.

证书产品范围: DS201 UL; Uimp: 4kV; Ui: 500V; Ue: 230V; In: 6A,10A,13A,16A,20A,25A,30A,32A,35A,40A; 瞬时脱扣类型：B, C 型; I△n：10 mA, 30 mA, 300mA；额定剩余动作类型:A； 电磁式; I△m：4500A(In>25A),6000A(In≤25A); Ics:6000A;Icn: 6000A; 极数: 1P+N; 适用于隔离; 适用频率：50/60Hz; 型号解释详见附件 CQC证书编号:CQC20012277328 符合标准:GB/T 16917.1-2014;GB/T 16917.21-2008 有效期至:2029/07/16 原产国:Italy

Software Licencing for Cylon Engineering Centre (CEC), Unitron Command Centre (UCC) and Server WebLink (SWeb) have been updated to match the licencing in CXproᴴᴰ.

This is a maintenance update of Engineering and Supervisor software for legacy Unitron products.

This is a new version of the Unitron Command Centre (UCC) & Cylon Engineering Centre (CEC) that allows integration of a BACnet® trunk engineered in CXproᴴᴰ.

A deployment guide covering gateway configuration, secure system setup, cloud deployment and troubleshooting for the centralized DR monitoring cloud solution.

The CG(P)3 series products have been single surge tested by an independent third party test laboratory. These test confirm that the surge current ratings are tested and validated, not a calculated rating. Giving the customer confidence that the surge protective device will provide maximum protection during large surge events.

Step-by-step required tasks for a successful transition

How to set the Grid feeding monitoring relay CM-UFD.M33/ CM-UFD.M33M to comply with “EREC G98” and “EREC G99”

MVI Fault Interrupter 30-900 Amp. Minimum tripping and total clearing time-current characteristic curves