Publication Library

“Give your buildings a new
dimension” enables commercial
buildings to improve energy and
assets management.
Multi-site installations easily
achieve cost savings by leveraging
cloud solution.

“Give your buildings a new
dimension” enables commercial
buildings to improve energy and
assets management.
Multi-site installations easily
achieve cost savings by leveraging
cloud solution.

n order to carry out the provisioning
of CMS-700 in ABB Ability™ EDCS,
please follow the procedure as
described below. The first part of
the provisioning is to be performed
on the CMS-700 webserver, the
second part via EPiC (Electrification
Product intuitive Configurator)
wizard, the free software for ABB
Ability EDCS provisioning.

Provisioning and visualization in ABB Ability™ EDCS
of Energy meters communicating via Modbus RTU

Provisioning and visualization in ABB Ability™
EDCS of M2M

Application guide containing information about EntelliGuard G’s Features, Characteristics, Trip Unit, Accessories, Catalog numbers, Application Data, Physical Data, Standards and References. DET-653

Installation

TEST REPORT LBRP 14175/00 Rev. 0

RECORD OF PROVING TESTS LBRS 13893/00 Rev. 0 Page 1 of 6
- internal use only and not compliant with the requirements of the Standard UNI CEI EN ISO/IEC 17025 for tests reports -
modR-E 000A/lab-edA
TEST REQUEST NR.: 10013893
COPY TO : BENEDETTI Pierceleste
TESTED OBJECT : Steel profiles ZN200 and ZN275
TEST : Salt mist
PURPOSE OF THE TEST: Verify the corrosion resistance of the steel profiles in object
TEST STANDARD :
TEST RESULTS AND REMARKS:
Steel profiles ZN200 : salt mist test's failed, after 193 hours, there are red corrosion products
Steel profiles Zn275: the material is compliant to the specification.

Report INRIM 16-0367-01

RECORD OF PROVING TESTS LBRS15726/00 Rev. 0 Page 1 of 6
- internal use only and not compliant with the requirements of the Standard UNI CEI EN ISO/IEC 17025 for tests reports -
modR-E 000A/lab-edA
TEST REQUEST NR.: 10015726
COPY TO : BENEDETTI Pierceleste, QUARTERONI Andrea
TESTED OBJECT : Stainless steel AISI 304 sheet (all information attached at the end of the report).
TEST : Two 12 day periods (total 24 days):
- 5 cycles of 24h each to damp heat cycling test according to IEC 60068-2-30 (Test
Db) at (40 ± 3) ºC and relative humidity of 95 %
- 7 cycles of 24 h each to salt mist test according to IEC 60068-2-11; (Test Ka: Salt
mist), at a Temperature of (35 ± 2) ºC.
PURPOSE OF THE TEST: Resistance to corrosion (9.13.2 - Severity test B):
TEST STANDARD : IEC 62208
IEC 60068-2-30
IEC 60068-2-11
TEST RESULTS AND REMARKS:
The AISI 304 sample passed the test according to IEC 60068-2-30: any corrosion product has been found on the
surfaces.
TEST REPORT Nr :
Date of issue: 26.01.2017
Approved
Prepared Verified

Understanding National Electric Code (NEC) tap rules How do they apply to circuit breaker terminals?

Notice of automatic replacement of GE branded mini contactors

GE Industrial Solutions to ABB contactor cross-reference including Surion, C2000, Overloads, Manual Motor Starters, Efficor